Product Description
Introduction Of WH Flexible Nylon Block Oldham Coupling
The WH Flexible Nylon Block Oldham Coupling slides in the
corresponding radial slot on the end of the two sides of the half
coupling by using the intermediate slide block to realize the
coupling of the two half coupling. The WH Flexible Nylon Block
Oldham Coupling is suitable for the occasion of the speed of n
<250 r/min, the shaft stiffness is large, and there is no severe
impact, such as ball mill, etc.
The material of the WH Flexible Nylon Block Oldham Coupling can be
made of 45 steel, and the working surface needs to be heat treated
to improve the hardness. In order to reduce friction and wear, the
oil should be lubricated from the oil hole in the middle plate when
used.
The center slide of the WH Flexible Nylon Block Oldham Coupling is
usually made of nylon material, which is connected by 90 sides
relative slot and two side axle sleeves, so as to achieve the
purpose of transmitting torque. The central slider and sleeve of
the WH Flexible Nylon Block Oldham Coupling are anastomosed with
small pressure, which can make the coupling operate at zero
clearance in the operation of the equipment. As the use time
increases, the slider may lose the function of no recoil because of
wear. Therefore, the WH type slide couplings should often check or
change the central slider.
| model | Nominal torque Tn(Nm) | Allowable speed [n]r/min | Diameter of shaft hole | Length of shaft hole | D | D1 | B1 | B2 | l | Moment of inertia Kg.m2 | Mass kg |
| d1 d2 | Y | J1 |
| L |
| mm |
| WH1 | 16 | 10000 | 10,11
12,14 | 25-32 | 22-27 | 40 | 30 | 52 | 13 | 5 | 0.0007 | 0.6 |
| 32-42 | 27-30 |
| WH2 | 31.5 | 8200 | 12,12,16,(17),18 | 50 | 32 | 56 | 18 | 5 | 0.0038 | 1.5 |
| WH3 | 63 | 7000 | 16,(17),18,20,22 | 42-52 | 30-38 | 70 | 40 | 60 | 18 | 5 | 0.0063 | 1.8 |
| 52-62 | 38-44 |
| WH4 | 160 | 5700 | 20,22,24,25,28 | 80 | 50 | 64 | 18 | 8 | 0.013 | 2.5 |
| WH5 | 280 | 4700 | 25,28,30,32,35 | 62-82 | 44-60 | 100 | 70 | 75 | 23 | 10 | 0.045 | 5.8 |
| 82-112 | 60-84 |
| WH6 | 500 | 3800 | 30,32,35,38,40,42,45 | 120 | 80 | 90 | 33 | 15 | 0.12 | 9.5 |
| WH7 | 900 | 3200 | 40,42,45,48,50,55 | 112 | 84 | 150 | 100 | 120 | 38 | 25 | 0.43 | 25 |
| 112-142 | 84-107 |
| WH8 | 1800 | 2400 | 50,55,60,63,65,70 | 190 | 120 | 150 | 48 | 25 | 1.98 | 55 |
| WH9 | 3550 | 1800 | 65,70,75,80,85 | 172-212 | 132-167 | 330 | 190 | 180 | 58 | 40 | 4.9 | 85 |
| 172-212 | 132-167 |
| WH10 | 5000 | 1500 | 80,85,90,95,100 | 330 | 190 | 180 | 58 | 40 | 7.5 | 120 |
About Us
Nanpi county Jude transmission equipment manufacturing co., LTD. is
a enterprises that specialized in research and production coupling.
Also we can develop new products and bulk-production. With rich
experience, professional R&D team and various equipment in
coupling, it has superior conditions to satisfied your different
requirements.
Company main products are: all kinds of couplings for machinery
industry all over the word , such as radial elastic coupling, tyred
coupling, universal coupling, drum gear coupling, plum flower form
elastic coupling, rigid coupling oldham coupling, roller chain
coupling, diaphragm coupling, coupling column elastic sleeve pin
couplings, elastic dowel pin, elastic dowel pin coupling, pump
shaft coupling, etc..
The concepts of our company is live on quality and develop on
honor. The coupling has the advantage of high quality, low price,
complete product models.Our company will be your best choice, and
we look forward to cooperate with you.
